発表形式

Initialising ...

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

1
Preliminary analysis of the post-disassembly expansion phase and structural response under unprotected loss of flow accident in prototype sodium cooled fast reactor
小野田 雄一; 松場 賢一; 飛田 吉春; 鈴木 徹
Mechanical Engineering Journal (Internet), 4(3), p.16-00597_1 - 16-00597_14, 2017/06
For the prototype sodium-cooled fast reactor, MONJU, the mechanical energy and structural response under energetics caused by neutronic power excursion during Unprotected Loss of Flow accident (ULOF) were preliminarily analyzed. The objective of this study is to demonstrate the integrity of the reactor vessel against the mechanical load induced by the energetics. Conservative energy production was assumed in order to confirm the robustness of the safety design of MONJU. Mechanical energy was evaluated with the code in which mechanistic modelling of core expansion was implemented. The mechanical energy, which were obtained by analyzing the expanding behavior of core materials after energetics, were about one order of magnitude below the thermodynamic work potential calculated by assuming isentropic expansion of the fuel vapor to one atmosphere, which was often used as an indicator to express the severity of the energetics. Structural integrity was then evaluated with coupled fluid-structure dynamics code using the obtained mechanical energy. No or very small circumferential residual strain of the reactor vessel was evaluated in most analytical cases, and even in the most conservative energy production case, the residual strain was only 0.008 % so that the integrity of the reactor vessel is maintained. The result obtained in the present study shows that MONJU has enough robustness against the mechanical load under energetics.
2
Fundamental experiments of jet impingement and fragmentation simulating the fuel relocation in the core disruptive accident of sodium-cooled fast reactors
今泉 悠也; 神山 健司; 松場 賢一; 磯崎 三喜男; 鈴木 徹; 江村 優軌
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (DVD-ROM), 5 Pages, 2017/04
SFRの炉心崩壊事故における再配置過程を模擬するため、低融点合金を低水深水プール中に落下させた。なおここで、ノズル出口と底板の距離は、微細化を起こすには不十分だと考えられる距離に設定された。実験の結果、融体は底板に衝突した後、底板に沿って全方向に広がる様子が観察された他、底板上の温度は融体の分散につれ急低下していることが確認された。この結果により、融体の微細化と急冷は、底板の存在により促進されたことが示唆され、さらに、この促進現象は融体が底板上での分散により強制的に接触表面積が増加したことによるものであると考察した。また、試験後には顕著に微細化したデブリが観察されたが、これは、融体と水の界面にて微細な蒸気泡が生成されたことにより形成されたものと考えられる。
3
Experimental database for bed formation behaviors of solid particles
Sheikh, M. A. R.*; Son, E.*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 松場 賢一; 神山 健司; 鈴木 徹
Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 10 Pages, 2016/11
ナトリウム冷却高速炉の炉心損傷事故における再配置過程では、微粒化デブリによる堆積ベッド形成挙動がデブリベッド冷却による炉容器内事故終息の観点で重要である。本研究では、粒子堆積ベッド形成挙動に関する実験データベースを構築するため、微粒化デブリを模擬した固体粒子を円筒型の水プール中へ重力落下によって放出させ、粒子堆積ベッドの形状及び高さを測定する実験を行った。本実験では、材質及びサイズの異なる3種類(アルミナ,ジルコニア,スティール)の球形・非球形粒子を用い、これらのパラメータが粒子ベッドの堆積形状に及ぼす影響を調べるとともに、その結果に基づき粒子ベッドの堆積高さを予測する整理式を実験データベースとして開発した。開発した整理式は、本実験で把握された重要パラメータに対する堆積ベッド高さの変化傾向をよく再現しており、広範な適用性を有していることが示された。
4
A Recent experimental program to evidence in-vessel retention by controlled material relocation during core disruptive accidents of sodium-cooled fast reactors
松場 賢一; 神山 健司; 豊岡 淳一; Zuev, V. A.*; Ganovichev, D. A.*; Kolodeshnikov, A. A.*
Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 5 Pages, 2016/11
ナトリウム冷却高速炉の炉心損傷事故では、炉心領域の溶融燃料が炉心外へ流出することで損傷炉心がより深い未臨界状態に至るとともに、分散燃料が冷却の容易なデブリになると考えられる。このため、制御棒案内管を通じた燃料流出は炉心損傷事故の終息に影響を及ぼす重要な過程である。日本原子力研究開発機構とカザフスタン共和国国立原子力センターとの共同研究EAGLE計画では、制御棒案内管を通じた燃料流出挙動の解明を目的とした炉外試験をはじめとする新たな試験研究を開始した。本報告では、新たに開始した試験研究の進捗について、これまでに得られた試験結果を含めて述べる。
5
An Empirical correlation to predict the distance for fragmentation of simulated Molten-Core materials discharged into a sodium pool
松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 8 Pages, 2016/10
ナトリウム冷却高速炉の炉心損傷時に原子炉容器下部プレナムへ流出した溶融炉心物質がデブリ化するまでの距離の評価を目的として、溶融炉心模擬物質を冷却材中へ放出させる試験を行い、デブリ化距離と流出条件の関係を実験相関式として整理した。実験相関式による予測は実験結果とよく一致した。本研究により、冷却材の沸騰・膨張によるデブリ化促進効果を考慮することで、ナトリウム中におけるデブリ化距離を適切に評価可能であることがわかった。
6
Experimental investigation on characteristics of mixed particle debris in sedimentation and bed formation behavior
Sheikh, M. A. R.*; Son, E.*; 神山 基紀*; 森岡 徹*; 松元 達也*; 守田 幸路*; 松場 賢一; 神山 健司; 鈴木 徹
Proceedings of 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-11) (USB Flash Drive), 12 Pages, 2016/10
高速炉の炉心損傷事故時に形成される燃料デブリの落下・堆積挙動を明らかにするため、燃料デブリを模擬した特性の異なる固体粒子(アルミナ、スティール)の混合粒子を水プール中へ落下・堆積させる粒子ベッド形成実験を行い、堆積デブリベッドの形状に対する主要パラメータの影響を検討した。本研究により、燃料デブリの落下・堆積に関する数値モデル及びシミュレーションコードの検証に有効な実験データ及び知見が得られた。
7
Experimental discussion on fragmentation mechanism of molten oxide discharged into a sodium pool
松場 賢一; 神山 健司; 豊岡 淳一; 飛田 吉春; Zuyev, V. A.*; Kolodeshnikov, A. A.*; Vassiliev, Y. S.*
Mechanical Engineering Journal (Internet), 3(3), p.15-00595_1 - 15-00595_8, 2016/06
ナトリウム中へ流出した溶融炉心物質の微粒化距離に関する評価手法開発の一環として、カザフスタン共和国国立原子力センターの炉外試験施設を利用した微粒化試験で得られたアルミナデブリの粒子径を分析した。デブリの平均粒子径は0.3mm程度であり、流体力学的不安定性理論から予測される粒子径と同程度であったが、理論から予測されるようなウェーバ数への依存性は見られなかった。この分析結果から、アルミナ融体表面の流体力学的不安定が十分に成長する前の段階で発生する局所的なナトリウムの沸騰・膨張が、アルミナ融体の微粒化を促進させたと考えられる。
8
Preliminary analysis of the post-disassembly expansion phase and structural response under unprotected loss of flow accident in prototype sodium cooled fast reactor
小野田 雄一; 松場 賢一; 飛田 吉春; 鈴木 徹
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 10 Pages, 2016/06
For the prototype sodium-cooled fast reactor, MONJU, the mechanical energy and structural response under energetics caused by neutronic power excursion during Unprotected Loss of Flow accident were preliminarily analyzed. The objective of this study is to demonstrate the integrity of the reactor vessel against the mechanical load induced by the energetics. Conservative energy production was assumed in order to confirm the robustness of the safety design of MONJU. Mechanical energy was evaluated with the code in which mechanistic modelling of core expansion was implemented. The mechanical energy, which were obtained by analyzing the expanding behavior of core materials after energetics, were about one order of magnitude below the thermodynamic work potential calculated by assuming isentropic expansion of the fuel vapor to one atmosphere, which was often used as an indicator to express the severity of the energetics. Structural integrity was then evaluated with coupled fluid-structure dynamics code using the obtained mechanical energy. No or very small circumferential residual strain of the reactor vessel was evaluated in most analytical cases, and even in the most conservative energy production case, the residual strain was only 0.008 % so that the integrity of the reactor vessel is maintained. The result obtained in the present study shows that MONJU has enough robustness against the mechanical load under energetics.
9
Distance for fragmentation of a simulated molten-core material discharged into a sodium pool
松場 賢一; 磯崎 三喜男; 神山 健司; 飛田 吉春
Journal of Nuclear Science and Technology, 53(5), p.707 - 712, 2016/05
 被引用回数:1 パーセンタイル:42.15(Nuclear Science & Technology)
ナトリウム中へ流出した溶融炉心物質のデブリ化距離に関する評価手法を開発するため、X線透過装置を用いたナトリウム中デブリ化挙動の可視化実験を行った。本実験では、溶融炉心物質の模擬物質として約0.9kgの溶融アルミニウム(初期温度:約1473K)を内径20mmのノズルを通じてナトリウム中(初期温度: 673K)へ流出させた。実験の結果、ナトリウム中へ流出した溶融アルミニウムのデブリ化距離は100mm程度と評価された。本実験を通じ、デブリ化距離に関する評価手法の開発に有益な知見が得られた。今後、より比重の大きい模擬物質を用いた実験を行い、デブリ化距離と流出条件の関係を表す実験相関式を開発する。
10
Development of the evaluation methodology for the material relocation behavior in the core disruptive accident of sodium-cooled fast reactors
飛田 吉春; 神山 健司; 田上 浩孝; 松場 賢一; 鈴木 徹; 磯崎 三喜男; 山野 秀将; 守田 幸路*; Guo, L.*; Zhang, B.*
Journal of Nuclear Science and Technology, 53(5), p.698 - 706, 2016/05
 被引用回数:1 パーセンタイル:42.15(Nuclear Science & Technology)
炉心損傷事故(CDA)の炉内格納(IVR)はナトリウム冷却高速炉(SFR)の安全特性向上において極めて重要である。SFRのCDAにおいては、溶融炉心物質が炉容器の下部プレナムへ再配置し、構造物へ重大な熱的影響を及ぼし、炉容器の溶融貫通に至る可能性がある。この再配置過程の評価を可能とし、SFRのCDAではIVRで終息することが最も確からしいことを示すため、SFRのCDAにおける物質再配置挙動の評価手法を開発する研究計画が実施された。この計画では、炉心領域からの溶融物質流出挙動の解析手法、溶融炉心物質のナトリウムプール中への侵入挙動、デブリベッド挙動のシミュレーション手法を開発した。
11
Flexible heat-flow sensing sheets based on the longitudinal spin Seebeck effect using one-dimensional spin-current conducting films
桐原 明宏*; 近藤 幸一*; 石田 真彦*; 井原 和紀*; 岩崎 悠真*; 染谷 浩子*; 松葉 明日華*; 内田 健一*; 齊藤 英治; 山本 直治*; et al.
Scientific Reports (Internet), 6, p.23114_1 - 23114_7, 2016/03
 被引用回数:8 パーセンタイル:9.11(Multidisciplinary Sciences)
ヒートフローセンシングは、将来的にスマート熱管理の重要な技術要素となることが期待されている。従来、ゼーベック効果に基づく熱電変換技術は、熱の流れを電圧に変換することによって熱流を測定するために使用されてきた。しかし、ユビキタス・ヒートフロー可視化のためには、非常に低い熱抵抗を有する薄く柔軟なセンサが非常に望まれている。近年、別のタイプの熱電効果である縦スピンゼーベック効果が大きな関心を集めている。これは縦スピンゼーベック効果が、単純な薄膜デバイス構造のような熱電アプリケーションにとって有利な機能を潜在的に提供するためである。ここでは、縦スピンゼーベック効果ベースのフレキシブル熱電シートを紹介する。このシートは、熱流検出の用途に特に適している。この熱電シートは、「フェライトめっき」として知られているスプレーコーティング法を用いてフレキシブルプラスチックシート上に形成されたNi$$_{0.2}$$Zn$$_{0.3}$$Fe$$_{2.5}$$O$$_4$$フィルムを含んでいる。実験結果は、膜面に垂直に配向した柱状結晶構造を有するフェライトめっき膜が、曲げ可能な縦スピンゼーベック効果ベースのセンサに適した独特の一次元スピン流導体として機能することを示唆している。この新しく開発された薄い熱電シートは、熱流の本来の流れを妨げることなく、さまざまな形の熱源に取り付けられ、多目的な熱流の測定と管理につながる。
12
A Numerical study on local fuel-coolant interactions in a simulated molten fuel pool using the SIMMER-III code
Cheng, S.; 松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Annals of Nuclear Energy, 85, p.740 - 752, 2015/11
 被引用回数:5 パーセンタイル:17.64(Nuclear Science & Technology)
Studies on local fuel-coolant interactions (FCI) in a molten pool are crucial to the analyses of severe accidents that could occur for sodium-cooled fast reactors (SFRs). To clarify the characteristics of this interaction, in recent years a series of simulated experiments, which covers a variety of conditions including much difference in water volume, melt temperature, water subcooling and water release site (pool surface or bottom), was conducted at the Japan Atomic Energy Agency by delivering a given quantity of water into a molten pool formed with a low-melting-point alloy. In this study, motivated by acquiring further evidence for understanding its mechanisms, interaction characteristics including the pressure-buildup as well as mechanical energy release and its conversion efficiency, are investigated using the SIMMER-III, an advanced fast reactor safety analysis code. It is confirmed that, similar to experiments, the water volume, melt temperature and water release site are observable to have remarkable impact on the interaction, while the role of water subcooling seems to be less prominent. The performed analyses also suggest that the most probable reason leading to the limited pressurization and resultant mechanical energy release for a given melt and water temperature within the non-film boiling range, even under a condition of much larger volume of water entrapped within the pool, should be primarily due to an isolation effect of vapor bubbles generated at the water-melt interface.
13
Experimental discussion on fragmentation mechanism of molten oxide discharged into a sodium pool
松場 賢一; 神山 健司; 豊岡 淳一; 飛田 吉春; Zuev, V. A.*; Kolodeshnikov, A. A.*; Vasilyev, Y. S.*
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 6 Pages, 2015/05
ナトリウム中へ流出した溶融炉心物質の微粒化距離に関する評価開発の一環として、溶融酸化物(アルミナ)をナトリウム中へ落下させる微粒化試験を実施し、デブリの粒子径分布を分析した。アルミナデブリの平均粒子径は0.4mm程度であり、従来の流体力学的不安性理論を用いて予測される粒子径と同程度であった。しかし、従来の理論では溶融物質のウェーバー数が増加するとデブリ粒子径が減少すると予測されたのに対し、本微粒化試験ではそのような減少傾向は見られず、ウェーバー数によらずほぼ同じ大きさの粒子径となった。この分析結果から、溶融物質表面における流体力学的不安波が溶融アルミナの微粒化に至る程度まで成長する前に、熱的な現象、すなわち冷却材の局所的な沸騰・膨張が原因となって溶融アルミナを微粒化させたと解釈される。
14
First analysis of local fuel-coolant interactions in a molten pool by SIMMER-III using reactor materials
Cheng, S.; 松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 9 Pages, 2015/05
To clarify the mechanisms underlying local fuel-coolant interactions (FCI) in a molten pool, in this study, several latest calculations with reactor materials were performed using SIMMER-III, an advanced fast reactor safety analysis code. The performed SIMMER-III analyses suggest that despite of a comparatively larger temperature range of molten-fuel and sodium possibly varied during reactor accidents, the isolation effect of vapor bubbles generated at the melt-sodium interface seems to be the unique dominant mechanism that leads to the limited pressurization. Knowledge and fundamental data from this work might be utilized for future empirical-approach studies (e.g. those investigating the characteristics of critical coolant volume required for achieving the saturated pressurization at varied melt and coolant temperatures).
15
A Preliminary evaluation of unprotected loss-of-flow accident for a prototype fast-breeder reactor
鈴木 徹; 飛田 吉春; 川田 賢一; 田上 浩孝; 曽我部 丞司; 松場 賢一; 伊藤 啓; 大島 宏之
Nuclear Engineering and Technology, 47(3), p.240 - 252, 2015/04
 被引用回数:5 パーセンタイル:11.63(Nuclear Science & Technology)
In the original licensing application for the prototype fast-breeder reactor, MONJU, the event progression during an unprotected loss-of-flow (ULOF), which is one of the technically inconceivable events postulated beyond design basis, was evaluated. Through this evaluation, it was confirmed that radiological consequences could be suitably limited even if mechanical energy was released. Following the Fukushima-Daiichi accident, a new nuclear safety regulation has become effective in Japan. The conformity of MONJU to this new regulation should hence be investigated. The objectives of the present study are to conduct a preliminary evaluation of ULOF for MONJU, reflecting the knowledge obtained after the original licensing application through CABRI experiments and EAGLE projects, and to gain the prospect of In-Vessel Retention (IVR) for the conformity of MONJU to the new regulation. The preliminary evaluation in the present study showed that no significant mechanical energy release would take place, and that thermal failure of the reactor vessel could be avoided by the stable cooling of disrupted-core materials. This result suggests that the prospect of IVR against ULOF, which lies within the bounds of the original licensing evaluation and conforms to the new nuclear safety regulation, will be gained.
16
The Effect of coolant quantity on local fuel-coolant interactions in a molten pool
Cheng, S.; 松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Annals of Nuclear Energy, 75, p.20 - 25, 2015/01
 被引用回数:3 パーセンタイル:42.3(Nuclear Science & Technology)
Studies on local fuel-coolant interactions (FCI) in a molten pool are important for severe accident analyses of sodium-cooled fast reactors (SFRs). Motivated by providing some evidence for understanding this interaction, in this study several experimental tests, with comparatively larger difference in coolant volumes, were conducted by delivering a given quantity of water into a simulated molten fuel pool (formed with a low-melting-point alloy). Interaction characteristics including the pressure-buildup as well as mechanical energy release and its conversion efficiency are evaluated and compared. It is found that as water quantity increases, a limited pressure-buildup and the resultant mechanical energy release are observable. The performed analyses also suggest that only a part of water is probably vaporized during local FCIs and responsible for the pressurization and mechanical energy release, especially for those cases with much larger water volumes.
17
SIMMER-III analyses of local fuel-coolant interactions in a simulated molten fuel pool; Effect of coolant quantity
Cheng, S.; 松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Science and Technology of Nuclear Installations, 2015, p.964327_1 - 964327_14, 2015/00
 パーセンタイル:100(Nuclear Science & Technology)
To clarify the mechanisms underlying local fuel-coolant interactions (FCI) in a molten pool, in recent years several experimental tests, with comparatively larger difference in coolant volumes, were conducted at the Japan Atomic Energy Agency by delivering a given quantity of water into a molten pool formed with a low-melting-point alloy. In this study, to further understand this interaction, interaction characteristics including the pressure-buildup as well as mechanical energy release and its conversion efficiency are investigated using the SIMMER-III, an advanced fast reactor safety analysis code. It is found that the SIMMER-III code not only reasonably simulates the transient pressure and temperature variations during local FCIs, but also supports the limited tendency of pressurization and resultant mechanical energy release as observed from experiments when the volume of water delivered into the pool increases. The performed analyses also suggest that the most probable reason leading to such limited tendency should be primarily due to an isolation effect of vapor bubbles generated at the water-melt interface.
18
Characteristics of pressure buildup from local fuel-coolant interactions in a simulated molten fuel pool, 2; Numerical analyses using SIMMER-III
Cheng, S.; 松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Proceedings of 10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) (USB Flash Drive), 12 Pages, 2014/12
In this study, motivated by acquiring further evidence for understanding the characteristics of pressure buildup from local fuel-coolant interactions in a simulated molten fuel pool, SIMMER-III, an advanced fast reactor safety analysis code, is utilized for analyses. It is found that, similar to previous reported experimental analyses, the water volume and melt temperature are observable to have remarkable impact on the interaction, while the role of water subcooling seems to be less prominent. In addition, from the numerical runs performed it is also recognized that the most probable reason leading to the limited pressurization for a given melt and water temperature within the non-film boiling range, even under a condition of comparatively larger volume of water delivered into the pool, should be due to an isolation effect of vapor bubbles generated at the water-melt interface. Knowledge and data gained from this study might be utilized for potential empirical-model development as well as future investigations using reactor materials.
19
An Experimental study on heat transfer from a mixture of solid-fuel and liquid-steel during core disruptive accidents in Sodium-Cooled Fast Reactors
神山 健司; 小西 賢介; 佐藤 一憲; 豊岡 淳一; 松場 賢一; 鈴木 徹; 飛田 吉春; Pakhnits, A. V.*; Vityuk, V. A.*; Vurim, A. D.*; et al.
Proceedings of 10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) (USB Flash Drive), 8 Pages, 2014/12
The relocation of degraded core material through the Control Rod Guide Tubes (CRGTs) is one of essential subjects to achieve the in-vessel retention (IVR) in the case of postulated core disruptive accidents (CDAs) of sodium-cooled fast reactors (SFRs). The CRGT is available as the discharge path by its failure in the core region and heat-transfer from the core-material to the CRGT is one of dominant factors in its failure. In case of a core design into which a fuel subassembly with an inner duct structure (FAIDUS) is introduced, a mixture of solid-fuel and liquid-steel is supposed to remain in the core region since the FAIDUS could effectively eliminate fuel in liquid-state from the core region. Therefore, the objective of the present study is to obtain experimental knowledge for the evaluation of heat-transfer from the mixture of solid-fuel and liquid-steel to the CRGT. In the present study, an experiment was conducted using Impulse Graphite Reactor which is an experimental facility in National Nuclear Center of the Republic of Kazakhstan. In the experiment, the mixture of solid-fuel and liquid-steel was generated by a low-power nuclear heating of fuel and transferring its heat to steel, and then, data to consider the heat-transfer characteristics from the mixture of solid-fuel and liquid-steel to the CRGT were obtained. The heat-transfer characteristic was revealed by evaluating thermocouple responses observed in the experiment. Through the present study, knowledge was obtained to evaluate heat-transfer from the remaining core-materials to the CRGT.
20
Distance for fragmentation of a simulated molten-core material discharged into a sodium pool
松場 賢一; 磯崎 三喜男; 神山 健司; 鈴木 徹; 飛田 吉春
Proceedings of 10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) (USB Flash Drive), 7 Pages, 2014/12
ナトリウム中へ流出した溶融炉心物質のデブリ化距離に関する評価手法を開発するため、X線透過装置を用いたナトリウム中デブリ化挙動の可視化実験を行った。本実験では、溶融炉心物質の模擬物質として約0.9kgの溶融アルミニウム(初期温度: 約1473K)を内径20mmのノズルを通じてナトリウム中(初期温度: 673K)へ流出させた。実験の結果、ナトリウム中へ流出した溶融アルミニウムのデブリ化距離は100mm程度と評価された。本実験を通じ、デブリ化距離に関する評価手法の開発に有益な知見が得られた。今後、より比重の大きい模擬物質を用いた実験を行い、デブリ化距離と流出条件の関係を表す実験相関式を開発する。